HYT-BB51 2 inches hose skiving machine

HYT-BB51 2 inches hose skiving machine

HYT-BB51 hose skiving machine for the workshop. For skiving hoses up to 2” on the inside . 0.75 kW drive.  1-phase design or 3-phase design can be avaliable. HYT-BB51The new skiving machine tool : The lowest change-over times due to preset tool. Higher productivity due to low change-over times and user friendly operation for optimum results.   

Hose capacity(max. inner diameter) 1/4" - 2"

The advantage of HYT-BB51 hose skiving machine

1.The skiving machine is highly automatic, with a neat, efficient skiving performance.

2.The HYT-BB51 automatic hose skiving machine is equipped with a reducer to stabilize the speed.

3.For the sake of safety, the machine will automatically cease operation if the protective cover is removed.

Operating Procedures of HYT-BB51 hose skiving machine

1.before starting the machine, must cover the protective cover, check whether there are people and obstacles before and after the peeling machine.

2.open cover inspection must power off.

3.Before starting the machine, it is necessary to check whether the rotary knife and the die core meet the specifications of the stripping hose.

4.before starting, seriously testing rotating knife and the distance of the mold core, according to the measurement of the length of the coat, determine the work degree of rubber stripping, calculate the screw knife and rubber hose steel wire layer between the data, with similar specifications of the Angle of material under test strip first, try to peel tool setting, should from the large radial trail gradually adjusted, until clean rubber stripping, can work normally.

5.When the rubber stripping machine is in operation, if abnormal phenomenon is found, it should be stopped immediately and report the situation.

6.When the rubber stripping machine is in operation, the operator should keep the balance of the hose in his hand and not swing it up and down so as not to scratch the steel wire of the hose with the rotary knife.

7.the rotary knife must be fixed firmly, the knife shall not be too fierce, stripping work, do not remove the cutting strip by hand, so as to avoid danger.

8.No individual who has not been specially trained to do the job shall operate the machine.

9.Turn off the main power supply, clean up the work site, and keep the equipment and the ground clean and sanitary after the work is finished.

Additional Information:

Paymets Terms: T/T ( Bank transfer ), Western Union, Paypal , Credit Card, Online pay etc.

Port of Dispatch: Tianjin

Production Capacity: 200 sets per month

Delivery Time: 3~7 days 

E-mail vitty@hythosecrimpingmachine.com

Tel/Wechat/WhatsApp: +8618202619835